12 Volt 8 Amp Switch Mode Battery Charger
100 in stock
This sophisticated switch-mode charger has been specially developed for use with all deep-cycle sealed lead-acid batteries including “Dryfit” gel batteries.
It is light-weight, compact and efficient.
It will operate on any AC input voltage between 90VAC to 260VAC – this means it will work ANYWHERE in the world without an additional transformer or switching for the 1208.
It automatically charges, without requiring monitoring, all sealed lead-acid, maintenance type and gel batteries with a nominal voltage of 12 volts.
Charging begins immediately if the battery has been properly connected. The output of the char g e r i s electronically protected against short circuit, reverse polarity connection and extremely deeply discharged batteries. A green Light Emitting Diode (LED) on the front panel is used as a charging and state of charge indicator
Input: 90-260 VAC
Protection: Internal Primary
Isolation: Input-Output 3000VAC
Input-Case 2500 VAC
Output-Case 500 VAC
Safety: Designed to IEC 950
EMI-EMC: FCC Class B, CE, C-TICK
Standard: AS 3193
Input Connection: 3 Core SAA Cable IEC
Case Dimension: 105L X 207W X 60H
Casing Material: Extruded Anodized Aluminum
Weight: 1 Kg.
Cooling: Convection Cooled
Warranty: 12 Months
Topology: Switching DC Power
Boost Charge Voltage: 14.7VDC
Float Charge Voltage: 13.8VDC
Output Charge Current: 8 Amps
Ripple & Noise: 150 mV
Line Regulation: +/- 0.5% Over Input Range
Load regulation: +/- 1% 0-100% Load
Rise Time: 500 mS
Hold-up Time: 20 mS@Nominal Output
Short Circuit Protection: Output Shutdown
Over Current Protection: Primary Power Limited
Reverse Polarity Protection: Internal Relay
Operating Temp. Range: -5 degrees Celsius to 50 degrees Celsius
Storage Temperature: 30 Celsius to +85 Celsius
Relative Humidity: 10% to 90%
|Dimensions||105 × 207 × 60 cm|