Want to know where to buy? Click here
Find the right charger for your needs

User Guide Download

12V 8A Chargers

General Features

  • Simple LED
  • Fully Automatic Operation
  • Suitable for batteries up to 34AH (for 1208) and 70AH (for 1214)
  • Suitable for up tp 100AH in standby or float application
  • Used for Golf buggies and Automotives
  • The unit comes with standard alligator clips

This sophisticated switch-mode charger has been specially developed for use with all deep-cycle sealed lead-acid batteries including “Dryfit” gel batteries. It is light-weight, compact and efficient. It will operate on any AC input voltage between 90VAC to 260VAC - this means it will work ANYWHERE in the world without an additional transformer or switching for the 1208. It automatically charges, without requiring monitoring, all sealed lead-acid, maintenance type and gel batteries with a nominal voltage of 12 volts. Charging begins immediately if the battery has been properly connected. The output of the charger is electronically protected against short circuit, reverse polarity connection and extremely deeply discharged batteries. A green Light Emitting Diode (LED) on the front panel is used as a charging and state of charge indicator.

Technical Specification

Input 90-260 VAC
Frequency 47-63Hz
Isolation Internal Primary
Input-Output 3000VAC
Input Case 2500 VAC
Out-Case 500 VAC
Safety Designed to IEC 950
EMI-EMC FCC Class B, CE, C-tick
Standard AS3193
Input Connection 3 Core SAA Cable IEC
Case Dimension 105L X 207W X 60H mm
Casing Material Extruded Anodized Aluminium
Weight 1 Kg
Cooling Convection Cooled
Warranty 24 Months
Topology Switching DC Power
Efficiency 5%
Boost Voltage 14.7 VDC
Float Voltage 13.8 VDC
Output Charge Current 8 Amps
Line Regulation +/-0.5% Over Input range
Load Regulation +/- 1% 0-100% Load
Short Circuit Protection Output Shutdown
Over Current Protection Primary Power Limited
Reverse Polarity Protection Internal Relay
Want to buy? Find a local or online stocklist right here